Solo III v2.0
Shipping calculated at checkout
Pickup currently unavailable
Fast Shipping
Easy Returns
Great Support
An update on the extremely popular Solo III, the new Solo III v2.0 by Arizer features an streamlined operating system, large color display, and the stunning new Sea of Green color! On demand mode now has real-time display with adjustable presets, plus there is a new session toggle for extended session control.
Otherwise this is the same Solo III we've come to love which features a powerful heater as well as new XL glass stems with increased herb capacity making this a true heavy-hitter portable. The two straight stems and two water pipe adapter get you fully setup right out of the box at a great price!
What's Included:
- Solo III v2.0
- XL Glass Aroma Tube (90mm)
- XL Frosted Glass Aroma Tube (14mm WPA)
- Glass Aroma Tube (90mm)
- Frosted Glass Aroma Tube (14mm WPA)
- PVC Travel Tubes w/ Silicone Stem Caps
- USB-C Charger (5v, 3A)
- Stainless Steel Filter Screens x4
- Stainless Steel Stirring Tool
- Owner's Manual
How to Use:
Extracting and cleaning is easy with Arizer's glass stem design. We recommend loading the Aroma Tube via the straw method, then hold the tube inverted (bowl facing up) as you insert all the way into your Solo III v2.0 device. This upside down loading ensure no loose herbal material falls into your device which can make cleaning more difficult. It can also be helpful to lightly tamp your herbal material to make sure it's not in direct contact with the heater. Aroma tubes can be preloaded due to the included silicone cap making reloading on the go as easy as swapping tubes.
Once loaded, simply hold the M button until the Solo III v2.0 turns on. You can choose between on-demand and session mode, adjust your temperature and get to ripping!
We recommend an empty "burn off" cycle with all new extraction devices to ensure there are no residual oils from manufacturing. Simply power up your device and allow it to heat and run until it shuts off. You can repeat this process if you still notice any odor from your new device.
Cleaning:
The Solo III v2.0 device itself should require minimal regular cleaning if used properly. We do recommend a quick brush of the chamber whenever you remove an aroma stem to ensure there isn't any material in there. Aroma stems can be soaked in isopropyl alcohol and then rinsed with water after use for an easy clean.
If you do notice the inside of your device is dirty we recommend dipping a q-tip in isopropyl alcohol before inverting the device and wiping the inside of the bowl. By inverting the device and using a q-tip you reduce the chances of getting alcohol inside your device which can damage the electronics. Please be careful when cleaning your electronic devices and do as much cleaning as possible dry.
Suggested Collections



