Staroma OG Stainless Steel Housing

A heavy duty beast the Staroma OG is the stainless steel version of the Taroma OG.  The rebirth of a classic, back by popular demand we now offer the OG housing in addition to the 2.0. The Staroma OG utilizes a 20mm heater coil enclosed in SS316 Stainless Steel filled with ~165 Aroma Ruby Pearls to deliver instant and powerful extraction. The high-quality stainless steel ensures maximum durability providing sessions for years to come.

There is no learning curve or expertise required, simply set your preferred temperature and inhale. Like all QaromaShop desktop devices the housing securely screws over the coil and Aroma Ruby Pearls for a safe and secure fit, ensuring there is no possibility of spilled hot rubies.

What's different between the Staroma OG and 2.0? The OG housing's capacity is ~165 aroma ruby pearls, while the included screen in the 2.0 housing can be removed for a total capacity of ~200 rubies. But rubies don't tell the whole story as the performance from the OG is generally equal to if not greater than the 2.0 at equivalent temperatures. Ultimately they are both solid options that will last for a long time!

What's Included:

• Staroma OG Stainless Steel Housing
  

Compatible With:

• Adapter Titanium Bowl
• Titanium Injector / Diffuser Bowl
• Adapter Brass Bowl
  
• Adapter Stainless Steel Bowl
• Adapter Ceramic Bowl
• Adapter Short Glass Bowl
• Adapter Deep Glass Bowl
• Pass-Through Glass Bowl
• Multipurpose Adapter Glass Bowl

How to Use:

Suggested Starting Temp: 640 f

While the QaromaShop DIY kits require some installation before initial use, once installed operation of the Staroma OG is extremely easy. Each kit will include installation instructions, but generally users will install the wooden handle, perform a coil burn-off, place the coil inside the housing, fill the housing with included Aroma Ruby Pearls, and screw on the housing upper. Interested in a fully assembled kit? Reach out to patrick@ritual-co.com and we can make it happen.

Once installed, users just have to plug their PID into the wall, place their housing inside the porcelain stand, and then plug the coil into the PID Controller. Temperatures are set digitally through the controller which ensures consistent sessions every time. As your device is pre-heating, use the included stainless steel scoop to loosely pile your herbal material in the Adapter Bowl. Once at temperature, simply place the Staroma OG housing on top of your bowl and begin inhaling.

Please note the Staroma OG is not designed to be used with an empty gemstone chamber. Do not attempt to overfill the gemstone chamber or overtighten the housing on any model. Overfilling / overtightening can cause cracking due to thermal expansion and will void all warranties. We only guarantee compatibility with QaromaShop products, please do not use modified / incompatible coils on the Staroma OG. Due to the raised step in the Staroma OG housing it is only compatible with 20mm, 5 wrap, clockwise coils. For reference, see below for QaromaShop's coil pinout.

Coil (Male 5 pin XLR connector) PIN 1 = TC-, PIN 2 = TC+, PIN 3 = GND, PIN 4 = AC-, PIN 5 = AC+

Cleaning:

One of our favorite aspects of the Staroma OG is how easy it is to clean. Because the air is heated before touching your herbal material; the housing, coil and Aroma Ruby Pearls shouldn't require any cleaning. The exception is if users decide to use the Staroma OG as a double-decker where they drop concentrates on top of the heater. In this case, we recommend a good cleaning of the housing and Aroma Ruby Pearls between sessions.

We recommend swapping screens every 3-4 bowls for optimal airflow. Additionally, if users brush out their bowl and screen after each use they will find airflow stays open for longer. Bowls and screens can be soaked in isopropyl alcohol and rinsed for easy cleaning.